![]() ![]() They’re lightweight, durable, and inexpensive. Plastic: Many indoor teeter-totters are made entirely of plastic. Metal teeter-totters are incredibly durable, but they weigh more than plastic ones and are therefore more difficult to move. Metal frames are used on outdoor and indoor models, but they typically have plastic seats for a more comfortable ride. Metal: Powder-coated steel is the metal of choice because it’s strong and weather resistant. ![]() Compare your measurements to the teeter-totter’s specifications to make sure you have plenty of clearance.īestReviews Teeter-totter features Materials Whether you plan to put the teeter-totter in a classroom, playroom, or backyard, measure the space carefully. It shouldn’t be used by people over the maximum weight limit or age range. Stability is also a matter of using the teeter-totter appropriately. Some models are stable only when permanently secured, but others are stable whether they’re bolted down or not. The base should be wide enough and the fulcrum properly positioned so that it’s nearly impossible for the device to tip over while in use. BaseĪ rickety teeter-totter has no place in your backyard. As always, follow the recommendations of the manufacturer for the safest play. Some metal models support up to 300 pounds, while molded plastic models support far less. The maximum weight limit is a more accurate measure of a teeter-totter’s limitations. Rather than relying on the riders to push off the ground, these are powered by a rocking motion.Īll teeter-totters have either a maximum weight limit (the total weight of both riders) and/or a suggested age range. They come in two- and four-seat versions with either a plastic or metal frame. ![]() Rocking chair: These models forgo the traditional fulcrum for a rocking chair design.These models take up more space and may be slightly heavier than a two-seat model, but it means you can add more friends to the mix. ![]() Then there are those that place a pair of two-seat teeter-totters on the same fulcrum. Others are long enough for two children to sit one in back of the other on either end. Some models have two children sitting side by side on either end of the teeter-totter. Though designs vary, these models only fit two kids at a time, one on each end who pushes off the ground when their end of the teeter-totter lowers.įour seats: Four-seat models are perfect for bigger families, in-home daycares, and for those homes where neighborhood kids congregate. The fulcrum used to be as simple as a log, but today it’s typically a raised bar, tripod, quad base, or, in the case of commercial models, a spring. But the board has been replaced with a metal bar and topped with seats and handles for comfort. When you break it down, a teeter-totter is a board balanced on a fulcrum. Two seats: Two-seat teeter-totters are the classic design, but you might have a hard time recognizing some of them because they’ve been reengineered to be safer and more dynamic. You can purchase commercial teeter-totters for your backyard, but they can cost as much as ten times more than a domestic model, and they need to be secured permanently in one spot. Domestic models are less expensive, but they have a lighter build and sacrifice durability. Home teeter-totters are what you generally find in backyards, while commercial teeter-totters are found in public parks and school playgrounds. The word “teeter-totter” first appeared in 1530 and referred to an act of balancing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |